background image

31

30

 Power Supply Use:

You MUST use the Power Supply provided with your unit or you VOID the Key 
Digital

®

 Warranty and risk damage to your unit and associated equipment.

 Important Product Warnings:

1. 

Connect all cables before providing power to the unit.

2. 

Test for proper operation before securing unit behind walls or in hard to access 
spaces.

3. 

If installing the unit into wall or mounting bracket into sheet-rock, provide proper 
screw support with bolts or sheet-rock anchors.

 Safety Instructions:

Please be sure to follow these instructions for safe operation of your unit.

1. 

Read and follow all instructions.

2. 

Heed all warnings.

3. 

Do not use this device near water.

4. 

Clean only with dry cloth.

5. 

Install in accordance with the manufacturer’s instructions.

6. 

Do not install near any heat sources such as radiators, heat registers, stoves, or 
other apparatus (including amplifiers) that produce heat.

7. 

Only use attachments/accessories specified by the manufacturer.

8. 

Refer all servicing to qualified service personnel. Servicing is required when the 
device has been damaged in any way including:

 

»

Damage to the power supply or power plug

 

»

Exposure to rain or moisture

Summary of Contents for KD-CX800



















Reviews: