Key Digital KD-CX800, Operating Manual

Page: 7 / 18

11 10
Application Example
Stackable Smart Network Switches
TCP/IP
TCP/IP
TCP/IP
3rd Party Master Controller
KD-IP1080Tx KD-IP1080Tx
IR
KD-IP1080Rx KD-CX800
HDMI
x3
IR
KD-IP1080Rx KD-CX800
HDMI
x3
IR
KD-IP1080Rx KD-CX800
HDMI
x3
IR
KD-IP1080Rx KD-CX800
HDMI
x3
Network
Router
3rd Party
Touchscreen
WiFi
Satellite (x6) Cable (x6)
HDMI HDMI
x6 x6
TCP/IP
Mode 3: Third-Party Control via KeyCode Open API
›
KD-CX800 can be controlled by any third-party control system supporting TCP/IP
›
Set the desired configuration for each I/O port using the web control interface. See
Web Control Interface section for more information.
»
The desired configuration can only be applied to an I/O port using the web
control interface. It is not adjustable via the API commands.
»
Future Key Digital software releases
will support dynamic I/O port
assignment functionality
›
KD-CX800 KeyCode Open API commands contain parameters about the executed
command’s format and protocol, as well as the controlled device’s command
›
IMPORTANT:
Each I/O port has a specific TCP port number assignment.
» Ports numbers are adjustable, but all port numbers must be unique.
›
Please see KeyCode Open API Specification section for all commands