Key Digital KD-CX800, Operating Manual

Page: 14 / 18

25 24
<TCP port> TCP port number From 0 to 65535
<port level> Trigger port level LEVEL_HIGH:
I/O port trigger input pin is
high state.
LEVEL_LOW:
I/O port trigger input pin is
low state.
<set level> Trigger level to set HIGH:
Change I/O port trigger
output pin to high state.
LOW:
Change I/O port trigger
output pin to low state.
<CFG_RSP> Standard configuration command
response See table below: “Possible
Responses”
<port mode> Port mode IRL:
I/O port is IR Sensor mode.
IRIN:
I/O port is Serial IR Input
mode.
IROUT:
I/O port is IR Output mode.
RS:
I/O port RS-232 mode.
TR:
IO port is Trigger Input/
output mode.
<stop bit> RS-232 stop bit setting 1:
1 stop bit.
1.5:
1.5 stop bits.
2:
2 stop bits.
<parity> RS-232 parity type PAR_NONE:
No parity.
PAR_ODD:
Odd parity.
PAR_EVEN:
Even parity.
PAR_MARK:
Parity force to 1(Mark).
PAR_SPACE:
Parity force to 0(Space).
PAR_MULTIDROP:
Multidrop mode.
<time interval>
/ <timeout> This value sets the time interval /
timeout value for a port timer.
-For Trigger usage, time interval
is the frequency that the port will
return its current sensed voltage
state.
-For RS-232 usage, timeout is the
amount of time in milliseconds that
Rx data is stored in the buffer From 0 to 65535
milliseconds