2
1. Safe testing
Electricity is dangerous and can cause injury and death. Always treat it with the
greatest of respect and care. If you are not quite sure how to proceed, then stop,
take advice from a qualified person.
This instruction manual contains warning and safety rules which must be
observed by the user to ensure safe operation of the Tester and retain it in safe
condition. Therefore, read through these operating instructions before using the
Tester.
IMPORTANT:
The Tester must only be used by a competent and trained person and operated in
strict accordance with these instructions.
KEWTECH
will not accept liability for any damage or injury caused by misuse or
non-compliance with the instructions or with the safety procedures.
It is essential to read and to understand the safety rules contained in these
instructions and with the safety procedures.
The symbol
indicated on the Tester means that the user must refer to the
related sections in the manual for safe operation of the Tester.
Be sure to carefully read instructions following each symbol
in this manual.
DANGER
● The Tester can be connected only to the commercial power of 100V –
253V, 50Hz.
● For safety reasons, only use the Test Leads designed to be used with this
Tester and recommended by KEWTECH.
● Use only grounded mains outlets to supply the Tester.
● Do not touch the device under test whilst testing is in progress.
DANGER :
is reserved for conditions and actions that are likely to cause
serious or fatal injury.
WARNING
: is reserved for conditions and actions that can cause serious or
fatal injury.
CAUTION
: is reserved for conditions and actions that can cause injury or
instrument damage.
