![background image](http://html.mh-extra.com/html/kettler/sm3616-68/sm3616-68_training-and-operating-instructions_1959522029.webp)
SM3616-68 / SM3656-68
29
GB
Training
Stillstand
Strain
✔ ✔
Profile
✔ ✔ ✔ ✔ ✔ ✔
Distance
✔
✔
Time
✔
✔
Energy
✔
✔
Max. Pulse
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
or
Fat burning
65%
or
Fitness
75%
✔ ✔
✔ ✔
or
Manually
40-90%
Target pulse
40-200
✔ ✔
✔ ✔
Time/Distance Swichover
✔ ✔ ✔ ✔ ✔ ✔
Recover y
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Input and functions
Strain
Profile
Exceeding
Value / Input
%
MAX
Maximal Pulse 121-210
✔
+1
+1
+1
Off
Target pulse
Fat burning
65%
or
Fitness
75%
✔
+11 –11*
or
Manually
40-90%
Target pulse
40-200
+11 –11*
*note: appears only, if the target pulse was achieved once
}
Display in case of pulse events
If the entered training pulse (-11 beats) is
undercut, the symbol “
LO
” is shown.
If it is exceeded (+11 beats) the symbol
“
HI
” is shown.
If the maximum pulse is exceeded, the “
HI
”
arrow is flashing and the writing “
MAX
” is
shown.
If the “alarm sound in case of exceeding
the maximum pulse” is activated in
individual settings (page 30), additional
sounds are output.
}
Display colours and their meaning:
The display can illuminate in 3 different colours:
blue, green
and
red
. To ensure an obvious notification of pulse events the meaning of
the colours are defined as follows:
The display illuminates
blue
if the following conditions apply:
• The pulse monitoring is deactivated
• The target pulse monitoring (-/+ 10 pulses) is active but not reached yet.
• The target pulse monitoring is deactivated, the pulse limit monitoring is active but the pulse is below the selected pulse limit.
• You are in the default area.
The display illuminates
green
:
The pulse is within the range of the target pulse monitoring (-/+ 10 pulses)
The display illuminates
red
:
If the pulse limit is exceeded while the pulse limit monitoring is active the display turns red.