INSTALLATION
STEP 6
Aim Fixtures
1. Rotate the fixture to aim the product.
2. The product includes a geared constant-torque hinge that does not require any locking mechanism.
3.
Optional:
Tighten the locking screws at the end of each fixture using a T10 torx wrench or 2mm
Hex wrench.
STEP 7
Address Fixtures and Program Content
1. Use Ketra’s Design Studio Software to address and configure the products.
12 |
G2
INSTALLATION GUIDE
770-000003-01 r09
© 2019 Ketra, Inc. All rights reserved