Kessel Staufix FKA Comfort, Installation And Operating Manual

Page: 43 / 82

43
8 parameters are displayed 1.5.1 Mains switch-on delay
1.5.2 Switch-on block
1.5.3 Switch-on delay 1
1.5.4 Run-on time 1
1.5.5 Max. cycles flap 1
1.5.6 Max. current flap 1
1.5.7 Transmitting figure
1.5.8 System diagnosis SDS
Switch-on delay after power failure
Default value is 2 sec.
Not occupied not occupied
Display Description Information
Switch-on delay for the motor-driven
flap is displayed Default value is 2 sec.
not occupied
not occupied
The maximum flap cycles are dis-
played Default value is 5000 closing procedures.
Then alarm message “Replace motor”
7. Operating the Comfort control unit
The maximum power consumption
value of the motor is displayed
010-845EN_FKA_Schaltgerät_2011_03_010-131 Stand 10-07_AKTUELL2008.qxd 25.10.11 10:32 Seite 15