UBS Hydro II
Maintenance
EN
2018-05-02
46 / 60
7.6
Measures after maintenance is done
Personnel:
•
Private and commercial users
Carry out the following steps after completing the maintenance work and switching
on the machine:
1.
Check all the screw connections which may have loosened earlier for a tight
fit.
2.
Check whether all the safety devices and coverings removed earlier have
been installed again properly.
3.
Ensure that all tools, materials and other equipment used have been
removed from the work area.
4.
Clean the work area and remove any discharged materials, such as liquids,
processing materials or the like.
5.
Ensure that all safety devices of the machine are working perfectly.
7.7
Storage
If the machine is not used for a longer period, perform the following steps:
1.
Clean it
2.
Preserve the engine (Observe the engine manufacturer’s instruction
manual)!
–
Discharge fuel completely or refill the fuel tank completely; add fuel
stabiliser to the fuel.
–
Leave the engine running for approx. 1 minute
–
Fill a spoonful of engine oil in the opening of the spark plug (approx.
30 millilitres) and then spin the engine slowly.
–
Reinstall the spark plugs and do not plug the spark plug terminal. Pull
on the starter handle until you feel the compression resistance, in this
way the valves are closed.
–
Every 2 - 3 weeks, slowly spin the engine again and pull again until
you feel the compression resistance.
3.
Jack the driving wheels
–
Jack the machine on logs, so that the driving wheels do not stand on
the floor. Pay attention to stability!
4.
Shelter the machine
–
To avoid corrosion, protect the machine from weather effects. Do not
store the machine in humid rooms, storages of artificial fertilisers or
stables.
5.
Cover the machine with a cloth or similar.
