UBS Hydro II
Assembly/set up, installation, first commissioning
EN
2018-05-02
27 / 60
5
Assembly/set up, installation, first commissioning
5.1
Safety instructions
Please strictly observe all safety instructions listed in the chapter Safety!
(See chapter 2 Safety on page 7)
5.2
Assembly of attachments
Fig. 5: Assembly of attachment
1
Locking lever
2
Wearing bushing
3
Coupling cam
4
Coupling of attachment
To mount the attachments carry out the following steps:
•
For the assembly of an attachment, the holding fixture of the attachment and
the fixing tube on the driving machine must be free from dirt and well-
greased (See chapter 7 Maintenance on page 39).
•
The coupling of the attachment (4) and the wearing bush (2) of the driving
machine must be at the same height to allow them to be pushed together.
For this purpose, some attachments have parking supports that can be
adjusted to the appropriate height.
