UBS Hydro II
Dismantling, disposal
EN
2018-05-02
51 / 60
9
Dismantling, disposal
9.1
Safety instructions
Please strictly observe all safety instructions listed in the chapter Safety!
(See chapter 2 Safety on page 7)
9.2
Dismantling
Before starting the dismantling:
•
Switch off the machine and safeguard it against a restart.
•
Physically disconnect all power supplies from the machine, discharge stored
residual energies.
•
Remove the consumables and supplies as well as the processing materials
and dispose them in an environmentally-friendly manner.
Subsequently, clean the assemblies and components properly and dismantle them
by following the locally applicable work safety and environmental safety
regulations.
9.3
Disposal
If no return- or disposal agreement has been signed, send the dismantled
components for recycling:
•
Scrap metals.
•
Send plastic components for recycling.
•
Sort the remaining components according to material composition and
dispose them of.
CAUTION
Environmental damage caused by incorrect waste disposal!
An incorrect disposal can result in environmental damage.
•
e-waste, electronic components, lubricants and other auxiliary materials
must be disposed of by the authorised specialist company.
•
In case of doubt, get information about proper environmental disposal from
the local authorities or from specialist waste disposal companies.
