106
770/GS/GJ-BA-defsi-0023
4.7 Animal
Weighing/Averaging
Animal Weighing/Averaging
Code 2 1 7
Symbol displayed:
Use this program to determine the weights of living animals or weights under unstable
ambient conditions.
In this program, the weight is calculated, by the balance, as the average of a selectable
number of individual weighing operations. These weighing operations are also known as
“sub-weighing operations“.
During averaging, the number of individual sub-weighing operations left is shown on the
application display in a „countdown“ mode. The number of these sub-weighing
operations is adjustable. See also “Averaging“.
Once all sub-weighing operations have been performed, the calculated mean value is
indicated as a stable readout on the weight display.
Manual or Automatic Start Mode
Manual Start
Automatic Start Mode
Averaging is always started by pressing
the
F
key. The symbol or “AUTO“
flashes during this time.
You will have to press the
F
key to initially
start the program for averaging the first
weight. All further averaging operations will
be started automatically. The symbol or
“AUTO“ flashes during this time. The result
is locked into the display until the balance
has been unloaded.
Animal weighing/Averaging will start by:
Code
Manual mode
3 8 1
Automatic mode
3 8 2*
Delayed Start Mode
The more active an animal is, the greater the difference must be between two
successive sub-weights measured.
Depending on individual requirements, starting the averaging operation can be delayed
either in the automatic or manual mode until the animal you are weighing has calmed
down to a certain degree.
