80
770/GS/GJ-BA-defsi-0023
1.3 Operating
the
Balance
1.3.1 Warm-up Time
To deliver exact results, the balance must warm up for at
least 30 minutes after initial connection to AC power or after
a relatively long power outage. Only after this time will the
balance have reached the required operating temperature.
1.3.2 Turning the Balance On and Off (Standby Mode)
Press the
ON/OFF
key to turn the display on and off.
1.3.3 Self-Test
After the balance has been turned on, automatic self-test of
the balance’s electronic circuitry is performed. At the end of
the self-test, a zero readout is displayed. This means that
the balance is ready to operate.
