KERN-DEUDIAM KDF 700-7,5E Operating Manual Download Page 17

Seite / page

17

KDF 700E / 800E

Operating manual

11. Customer Service

To guarantee a fast delivery of your order and avoidant wrong delive-
ry, the following details are absolutely necessary with every order of 
spare parts.

1. Machine type according to data plate
2. Fabr.-Nr. according to data plate
3. Number of article according to spare parts list
4. desired quantity of spare parts

Floor saw

KERN-DEUDIAM

Diamantwerkzeuge und Maschinen GmbH

Industriestr.24   I   33161 Hövelhof   I   Germany

Phone:(0049)05257/507-0   I   Fax:(0049)05257/507-40

E-Mail:[email protected]   I    Internet: www.kern-deudiam.de

KERN-DEUDIAM

Diamantwerkzeuge und Maschinen GmbH

Industriestr.24   I   33161 Hövelhof   I   Germany

Phone:(0049)05257/507-0   I   Fax:(0049)05257/507-40

E-Mail:[email protected]   I    Internet: www.kern-deudiam.de

Eine  regelmäßige Wartung und Plege ist Voraussetzung für die stän

-

dige Funktion und Einsatzbereitschaft. Zur Bestellung von Ersatz-
teilen bedienen Sie sich bitte der nachfolgenden Ersatzteilliste. Zur 
weiteren Information dienen die dazugehörigen Zeichnungen.

Der Einbau und/oder die Verwendung nicht durch uns gelieferter 

Ersatzteile kann unter Umständen konstruktiv vorgegebene Eigen

-

schaften des Gerätes oder der Maschine verändern und dadurch die 
aktive und/oder passive Sicherheit beeinträchtigen. 

Für Schäden, die durch die Verwendung selbst beschaffener Ersatz

-

teile entstehen, ist jedoch die Haftung und Gewährleistung seitens 

der KERN- DEUDIAM Diamantwerkzeuge und Maschinen GmbH aus

-

geschlossen.

For this machine to perform correctly a regular maintenance is ab-
solutely necessary. To order spare parts refer to the attached spare 
parts list. For further information refer to the assembly drawings 
listed in the parts list.

Using non genuine parts can under circumstances, alter the given 

constructive characteristics of the loor saw and could inluence the 

active and/or passive safety.

KERN-DEUDIAM Diamantwerkzeuge und Maschinen GmbH cannot 

be made liable for any damage caused by spare parts they have not 
supplied.

Summary of Contents for KDF 700-7,5E



















Reviews: