Seite / page
12
KDF 700E / 800E
Operating manual
8.5 Feed
Manipulate the lever of the brake that the loor saw can be pushed.
Move the loor saw by steady pushing.
High pushing let the loor saw mounting out of the cut.
In danger, activate the emergency switch immediately.
8.6 Stop cutting
Lift the saw blade out of the cut, close the ball valve at the water
tank, activate the brake and turn the switch at the engine off. (read
the corresponding chapter at the engine manual).
Never start the engine when the blade is in the cut.
The saw blade can keep turning over 1 minute after the power has
been switched off. Assembling or disassembling should only be take
place after the saw blade has come to a stop.
Floor saw
