Seite / page
11
KDF 700E / 800E
Operating manual
8.
Operation
8.1 Notice
After checking the guard has been lowered over the blade safely one
can now engage the loor saw. Remember that only people, who have
read the manual may work with this machine.
8.2 Marking the cutting line
Mark the cutting line with crayon or similar. Align the loorsaw with
the blade and the guarding device to this line.
8.3 Start the engine
Be shure that the emergency stop is pulled out. Manipulate the lever
of the brake that the loor saw cannot move. To start the engine read
the corresponding chapter at the manual.
In case the direction is wrong, reverse the reversing Star Delta switch
position, after the saw blade has come to a stop.
Open the ball valve and sure to have suficient water low to guaran
-
tee appropriated cooling. Never use the equipment without cooling
water.
8.4 Adjusting the cutting depth
Lower the saw blade by using the handwheel. Fix the handwheel with
the locking screw when the requisite depth ist reached.
Complete turn = ca.12 mm.
Floor saw
