Seite / page
14
KDF 700E / 800E
Operating manual
Floor saw
To tension or change the drive belt, the belt guard and the cover must
irst be removed. (See section 6.1)
Then, by loosening the hexagon nut on the threaded rod, the motor
together with the console plate can be swiveled forward and the drive
belt pulled from the pulleys.
After winding the new belt, the motor is brought into the starting po-
sition and the degree of tension on the belt is adjusted by tightening
the nut on the threaded rod.
The belt guard is then reassembled in the reverse order.
A
