Kerio Tech Firewall6 Administrator'S Manual Download

Page: 46 / 404

Chapter 5

Network interfaces

IP Address and Mask

IP address and the mask of this interface’s subnet.

If the more IP addresses are set for the interface, the primary IP address will be displayed.

Windows

, the address assigned to the interface as first is considered as primary.

Status

Current status of the interface (up/down).

Internet

This information indicates the method the interface uses for Internet connection (pri-

mary/secondary connection, bandwidth used).

Details

Adapter identification string returned by the device driver.

System Name

The name of the adapter (e.g. “LAN connection 2”). The name is for reference only.

Gateway

IP address of the default gateway set for the particular interface.

DNS

IP address of the primary DNS server set on the interface.

MAC

Hardware (MAC) address of a corresponding network adapter. This entry is empty for

dial-ups as its use would be meaningless there.

Use the buttons at the bottom of the interface list to remove or edit properties of the chosen

interface. If no interface is chosen or the selected interface does not support a certain function,

appropriate buttons will be inactive.

Add VPN Tunnel

Use this option to create a new server-to-server VPN tunnel. Details on the proprietary

Kerio VPN

solution are provided in chapter

Note:

Dial-ups must be defined by following a standard procedure in the operating sys-

tem.

Modify

Click on

Edit

to view and/or modify parameters of the selected interface.

WinRoute

, it is specify to specify a special name for each interface (names taken from

the operating system can be confusing and the new name may make it clear). Likewise, it

is possible to change a group to which an interface belongs, in accordance of the network

it is actually connected to (Internet, secure local network, another network — e.g.

DMZ

It is also possible to change the default gateway and edit parameters of DNS servers.

In most cases, if traffic to the corresponding networks works smoothly before

WinRoute

installation, it is not necessary to change settings taken from the operating system.

For dial-ups it is also possible to set login data and dialing options (see chapter

6.2

For

VPN server

and VPN tunnels, a dialog for setting of the

VPN server

(see chapter

23.1

)

or a VPN tunnel (refer to chapter

23.3

) will be opened.

Summary of Contents for Firewall6





















































































































































































































































































































































































































Search results

Summary of Contents for Firewall6

Reviews:

Related manuals for Firewall6

Brands by name

Popular brands

Kerio Tech Firewall6, Administrator'S Manual

Search results

Summary of Contents for Firewall6

Reviews:

Related manuals for Firewall6

Brands by name

Popular brands