Chapter 9
Bandwidth Limiter
134
addresses across the local network and the Internet. Where user workstations use fixed
IP addresses, it is also possible to apply this function to individual users.
It is also possible to apply bandwidth limiter to a particular time interval (e.g. in work
hours).
These parameters can be set on the
Constraints
tab.
Figure 9.4
Bandwidth Limiter — IP Addresses and Time Range
At the top of the
Constraints
tab, select a method how bandwidth will be applied to IP
addresses and define the IP address group:
•
Apply to all traffic
— the IP address group specification is inactive it is irrelevant.
•
Apply to the selected address group only
— the bandwidth limiter will be applied
only if at least one IP address involved in a connection belongs to the address
group. The other traffic will not be limited.
•
Apply to all except the selected address group
— the bandwidth limiter will not be
applied if at least one IP address involved in a connection belongs to the address
group. Any other traffic will be limited.
In the lower section of the
Constraints
tab, a time range within which the bandwidth
would be limited can be set. Click
Edit
to edit the selected interval or to create a new one
(details in chapter
).
Setting of parameters for detection of large data volume transfers
The
Advanced
tab enables setting of parameters that will be used for detection of trans-
missions of large data volume — the minimal volume of transmitted data and inactivity
time interval. The default values (
200 KB
and
5 sec
) are optimized in accordance with
long-term testing in full action.
Caution! Changes of these values may reduce Bandwidth Limiter performance dramati-
Summary of Contents for Firewall6
Page 1: ...Kerio WinRoute Firewall 6 Administrator s Guide Kerio Technologies...
Page 129: ...8 5 HTTP cache 129...
Page 404: ...404...
