8.4 Proxy server
121
Proxy Server Configuration
To configure proxy server parameters open the
Proxy server
tab in
Configuration
→
Content
Filtering
→
HTTP Policy
.
Figure 8.15
HTTP proxy server settings
Enable non-transparent proxy server
This option enables the HTTP proxy server in
WinRoute
on the port inserted in the
Port
entry (
3128
port is set by the default).
Warning
If you use a port number that is already used by another service or application,
WinRoute
will accept this port, however, the proxy server will not be able to run and the following
report will be logged into the
Error
log (refer to chapter
):
failed to bind to port 3128:
another application is using this port
If you are not sure that the port you intend to use is free, click on the
Apply
button and
check the
Error
log (check whether the report has or has not been logged) immediately.
Summary of Contents for Firewall6
Page 1: ...Kerio WinRoute Firewall 6 Administrator s Guide Kerio Technologies...
Page 129: ...8 5 HTTP cache 129...
Page 404: ...404...
