Kerio Tech Firewall6 Administrator'S Manual Download

Page: 319 / 404

23.3 Interconnection of two private networks via the Internet (VPN tunnel)

319

Figure 23.8

VPN tunnel — certificate fingerprints

If the local endpoint is set to the active mode, the certificate of the remote endpoint and

its fingerprint can be downloaded by clicking

Detect remote certificate

. Passive endpoint

cannot detect remote certificate.

However, this method of fingerprint setting is quite insecure —a counterfeit certificate

might be used. If a fingerprint of a false certificate is used for the configuration of

the VPN tunnel, it is possible to create a tunnel for the false endpoint (for the attacker).

Moreover, a valid certificate would not be accepted from the other side. Therefore, for

security reasons, it is recommended to set fingerprints manually.

DNS Settings

DNS must be set properly at both sends of the tunnel so that it is possible to connect to hosts

in the remote network using their DNS names. One method is to add DNS records of the hosts

(to the hosts file) at each endpoint. However, this method is quite complicated and inflexible.

If the

DNS forwarder

WinRoute

is used as the DNS server at both ends of the tunnel, DNS

queries (for DNS rules, refer to chapter

8.1

) can be forwarded to hostnames in the correspond-

ing domain of the

DNS forwarder

at the other end of the tunnel. DNS domain (or subdomain)

must be used at both sides of the tunnel.

Note:

To provide correct forwarding of DNS queries sent from the

WinRoute

host (at any side

of the VPN tunnel), it is necessary that these queries are processed by

DNS forwarder

. To

secure this, set local IP address as for the DNS server and specify former DNS servers in the

WinRoute’s DNS forwarder

Detailed guidance for the DNS configuration is provided in chapter

23.5

Summary of Contents for Firewall6





















































































































































































































































































































































































































Search results

Summary of Contents for Firewall6

Reviews:

Related manuals for Firewall6

Brands by name

Popular brands

Kerio Tech Firewall6, Administrator'S Manual

Search results

Summary of Contents for Firewall6

Reviews:

Related manuals for Firewall6

Brands by name

Popular brands