Kenyon KISS, Instruction Manual, Page: 11 / 22

OPTIONAL VENT ARANGEMENT:
USE Part # B93089
DUAL CHECK VALVE KIT
INCLUDES CHECK VALVE FOR A TANDEM
INSTALLATION WITH FACTORY INSTALLED
CHECK VALVE. THIS IS RECOMMENDED FOR
SAILBOAT THROUGH HULL INSTALLATIONS
Mount bottom pan
into counter cutout
first, using foam
tape only- no
screws
Feed hose
through “vee”
opening in
bottom pan
Suggested Vent
PERKO 506DPCHR or
similar
3/8” (10
mm
)
Diameter Vent
Pipe
hfpp hfpp hfpp hfpp
Cook Top
!
WARNING
GAS LEAKS, UNCONTROLLABLE
FLAME
FAILURE TO INSTALL CHECK
VALVE(S) AS SHOW N MAY CAUSE
WATER DAMAGE TO COOK TOP
RESULTING IN GAS LEAKS AND
UNCONTROLLABLE FLAME
Bottom pan
installed in
Countertop
COCKPIT SOLE
GALLEY SOLE
hfpp
Cook Top
installed in
Galley counter
Fig. 5 – “Winch Cubby” KISS
KISS KISS
KISS Vent Layout for Sailboats
“Through-Hull” KISS
KISS KISS
KISS Vent Layout For Sailboats
hbkvlk hbkvlk hbkvlk hbkvlk International, Inc.
International, Inc. International, Inc.
International, Inc. © 2005
VENT HOSE runs aft and up into
cubby, winch base, or other
compartment in the cockpit
area, terminates with a PERKO
506PDCHR or similar fuel tank
vent fitting. Compartment may
vent or drain inboard or
outboard.
THIS VENTING METHOD DOES NOT
CONFLICT WITH ANY ABYC
STANDARD.
CALL KENYON (860) 664-4906 for
copy of ruling
10 DEGREE SLOPE
TO DRAIN
Not
included
in Kit
9
CHECK VALVE
• NOTE “FLOW” LABEL (INLET IS RED)
• FACTORY INSTALLED
• OUTLET REQUIRES 5/8” ID HOSE
•
hbkvlk # B93088 FOR REPLACEMENT ASSY.