Kenwood VRS-5100 Instruction Manual Download Page 26

Page: 26 / 32

Ambience effects

ARENA

DSP Surround ARENA mode.

JAZZ CLUB

DSP Surround JAZZ CLUB mode.

THEATER

DSP Surround THEATER mode.

STADIUM

DSP Surround STADIUM mode.

DISCO

DSP Surround DISCO mode.

STEREO

Normal stereo playback.

• Dolby Digital or DTS signal having more channels than the maximum

number of playback channels available using the receiver’s current
settings is input, downmixing is performed to match the number of
available channels.

Adjust the volume.

Notes

• Depending on the type of the signal or speaker setting, some

listening modes cannot be selected.

• When playback is started, the sound may be cut or interrupted

before the input source is confirmed as Dolby Digital.

• To enjoy Dolby Digital surround (as well as all the other listening

modes) from a single component, be sure to use a Dolby Digital
compatible source component.

Adjustment of each channels’ level

You can adjust each channel’s level during listening music.

Press the FRONT key to adjust FRONT L channel’s level.

Use the MULTI CONTROL

∞

keys or TRIM

∞

keys to adjust

the sound level.

Press the FRONT key to adjust FRONT R channel’s level.

Use the MULTI CONTROL

∞

keys or TRIM

∞

keys to adjust

the sound level.

Press the FRONT key to return to the input indication.

• The sound level is adjustable from -10 dB to +10dB in 1dB step

increments.

• The adjustment item is displayed for approximately 20 seconds.
• Use the

CENTER

key to adjust sound level of center or

subwoofer channel.

• Use the

REAR

key to adjust sound level of Surround or Surround

Back channel.
Each press of the

REAR

key switches the channels as listed below.

Surround L channel.

Surround R channel.

Surround Back R channel.

Surround Back L channel.

• If you have selected

BS/SW BS

as the 6ch AMP setting, “RB” and

“LB” are not appeared but “BS”(Surround Back channel) is appeared
on the Display.

SETUP

LISTEN MODE

MULTI CONTROL

∞¥5

TRIM

∞¥5

LISTEN MODE

SOUND

SW
REAR

CENTER

FRONT

SETUP

SLEEP

Convenient functions

MUTE

DOLBY D

NEO:6

DSP

DIGITAL

ST.

AUTO

LFE

DOLBY PL

DTS -ES AAC

DISCRETE

MATRIX 6.1

ACTIVE EQ.

LS S BS RS

名称未設定-9

04.3.25, 4:51 PM

Summary of Contents for VRS-5100

































Search results

Summary of Contents for VRS-5100

Reviews:

Related manuals for VRS-5100

Brands by name

Popular brands

Kenwood VRS-5100, Instruction Manual

Search results

Summary of Contents for VRS-5100

Reviews:

Related manuals for VRS-5100

Brands by name

Popular brands