18
EN
Adjusting the sound
Adjusting the TONE (remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
mode, analog stereo mode.
1
Press the SOUND key to select the SOUND mode.
2
Use the MULTI CONTROL
∞¥5
keys or TRIM
∞
/
5
keys to select
“TONE” and then press the SOUND key.
3
When in TONE ON selection, press the SOUND key for the
following displays.
BASS
:
Select this to adjust the low frequency range.
TREBLE :
Select this to adjust the high frequency range.
4
Use the MULTI CONTROL
∞¥5
keys or TRIM
∞
/
5
keys to adjust
the sound quality.
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 20 seconds.
5
Press the SOUND
key to accept the setting.
MUTE
DOLBY DEX
NEO:6
DSP
TS
DIGITAL
ST.
AUTO
L
LFE
SW
C
R
DOLBY PL
II
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
S BS RS
MUTE
DOLBY DEX
NEO:6
DSP
TS
DIGITAL
ST.
AUTO
L
LFE
SW
C
R
DOLBY PL
II
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
LS S BS RS
INPUT SELECTOR
VOLUME CONTROL
VOLUME
+ ⁄ –
POWER
MUTE
TRIM
∞¥5
ACTIVE EQ
SOUND
PHONES
ACTIVE EQ
MULTI CONTROL
∞¥5
Normal playback
MUTE
DOLBY DEX
NEO:6
DSP
TS
DIGITAL
DOLBY PL
II
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
Muting the sound (remote control only)
The
MUTE
key lets you mute the sound of the speakers.
Press the MUTE key.
Blinks
To cancel
Press the MUTE key again so that the “MUTE” indicator goes off.
• MUTE ON can also be deactivated by turning the pressing
VOLUME CONTROL
knob (or
VOLUME
+/-
keys).
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1
EQ CINEMA :
Effective when watching a movie.
(The ACTIVE EQ. indicator lights up.)
2
EQ MUSIC
:
Effective when listening to music.
(The ACTIVE EQ. indicator lights up.)
3
EQ GAME
:
Effective when playing game.
(The ACTIVE EQ. indicator lights up.)
4
EQ OFF
:
The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ. indicator goes off.)
• ACTIVE EQ function will not be available when during recording
or DTS-ES MATRIX is ON, and during 96kHz LPCM playback.
Listening with headphones
1
Connect headphones to the PHONES jack.
•
The sounds from all speakers are cut off.
2
Use the VOLUME CONTROL knob (or /- keys) to
adjust the volume.
PHONES
6
Use the MULTI CONTROL
∞¥5
keys or TRIM
∞
/
5
keys to select
the “EXIT”.
7
Press the SOUND
key to return to the input indication.
*5473/15-22/EN
04.4.20, 1:34 PM
18