17
EN
Preparing for surround sound
Listening to a source component
Preparing for playback
Some preparatory steps are needed before starting playback.
Turning on the receiver
1
Turn on the power to the related components.
2
Turn on the power to this receiver by pressing ON/STANDBY
key or POWER key.
Selecting the input mode
If you have selected a component connected to the
DVD, VIDEO1
and
VIDEO2
jacks, make sure that the input mode setting is correct for the
type of audio signal to be used.
8
1
Use the INPUT SELECTOR knob or Input Selector keys to
select the source you want to listen to.
The input sources change as shown below:
1
“TUNER”
2
“DVD”
3
“VIDEO1”
4
“VIDEO2”
5
“AUX”
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob or /– keys to
adjust the volume.
INPUT SELECTOR
VOLUME CONTROL
VOLUME
+ ⁄ –
Input
Selector
ON/STANDBY
POWER
Normal playback
7
Adjusting the Speaker EQ.
To maximize the effect of ACTIVE EQ (
*
), select the size of Front
Speakers in more detail.
• If you have selected “FRNT NML” as the Front Speakers
setting, this menu is appeared.
1
Press the SETUP key.
2
Use the MULTI CONTROL
∞¥5
keys or TRIM
∞
/
5
keys to
select the “SP EQ” and then press the SETUP key again.
3
Use the MULTI CONTROL
∞¥5
keys or TRIM
∞
/
5
keys to
select the Speaker EQ setting.
1
“MEDIUM” : Medium size Front Speakers are con-
nected
to the amplifier.
2
“SMALL”
: Small size Front Speakers are connected
to the amplifier.
4
Press the SETUP key again to return to the
2
.
*5473/15-22/EN
04.4.16, 3:42 PM
17
