![background image](http://html.mh-extra.com/html/kenwood/nx-5900/nx-5900_service-manual_191654087.webp)
(No.RA032<Rev.001>)1-87
Note:
• When using the ESN Validation function of NXDN Trunk-
ing, the NXDN ESN number changes when the circuit
board is changed (the number is written on the circuit
board); the NXDN Trunking System cannot be accessed.
Use the KPG-110SM on the NXDN Trunking System side
to reprogram the NXDN ESN number.
• When a new printed circuit board is used, the KENWOOD
ESN changes, as does the Transceiver Information dis-
play of the KPG-D1/D1N, but this does not have any effect
on the operation of the transceiver.
• If changing to the original ESN, please contact our service
center.
ESN Label Layout
ESN Label
Summary of Contents for NX-5900
Page 88: ...MEMO ...
Page 119: ...MEMO ...