KNA-DV3100/DV3200
6
Diagnostics (DIAG) Screen Flow Chart
ACCESS CODE
ON-SCREEN
DIAGNOSTICS
NAVIGATION
INFORMATION
NAVI MANUAL
CHECK
PARTS
INFORMATION
Return to a MENU
top screen
REMOTE
CONTROL TEST
NAVI VOICE
OUTPUT TEST
NAVI RGB
TEST
MICROPHONE
TEST
GYRO, VEHICLE
SIGNALS
GPS
INFORMATION
RESET
POSITION
CAUTION SCREEN
FOR NO DISK
MENU SCREEN
Screen hiding
processing
Code input
Moving to the Diagnostics (Diag) Screen
There are two ways to move to the input screen for the ac-
cess code in order to move to the Diag screen. In other words,
the access code input screen can be displayed from two dif-
ferent screens.
■
How to move to the Diag screen 1
Press the portion of the screen indicated below for 3 sec-
onds or more when the Caution Screen for “No Map Disk”
is displayed.
• How to move to the access code input screen us-
ing the remote controller
Press the right screen selection button for 5 seconds or
more. (No.12 button on the remote control test screen speci-
fication)
Please insert a Map DVD.
The screen contents are to follow the HMI specifications.
Press for 5 seconds or
more on the top center
portion of the screen.
■
How to move to the Diag screen 2
Press for 5 seconds or more the position indicated below
while the MENU screen is displayed.
• How to move to the access code input screen us-
ing the remote controller (Overseas Market Ver-
sion)
Press the right screen selection button for 5 seconds or
more. (No.12 button on the remote control test screen speci-
fication)
Recovery from the Diag Screen
Recovery from the Diag screen can be made using the Back
swich.
MENU
1/2
Destination
Entry
Volume
Stored
Location
Navigation
Set Up
Route Options
Language
The screen contents are to follow the HMI specifications.
Press for 5 seconds or
more on the top center
portion of the screen.
TEST MODE