![background image](http://html.mh-extra.com/html/kenwood/kna-dv3100/kna-dv3100_service-manual_188320009.webp)
KNA-DV3100/DV3200
9
Screen Name : NAVI RGB test screen
■
Functions outline
• This is the screen for testing the NAVI color display.
■
Screen appearance
NAVI RGB TEST
A color buttons is
chosen.
Touch screen
4
1
2
White
black
Red
Green
blue
3
The selected color is
displayed on the whole
screen.
■
Display details
q
Color bar
• Bar display for the following colors : white, red, green, blue
and black.
w
Selection button
• When a button corresponding to a color is pressed, the
selected color is displayed on the whole screen.
e
Whole screen display
• The selected color is displayed on the whole screen.
• When other parts of the screen is pressed, the screen goes
back to the RGB test screen.
r
When terminated, the screen goes back to the NAVI Manual
check screen.
Screen Name : NAVI Voice Output test screen
■
Functions outline
• In this screen, the ADPCM output is tested.
■
Screen appearance
ON (Max)
ON (Normal)
NAVI VOICE OUTPUT TEST
ADPCM:
3
2
1
■
Display details
q
and
w
are ADPCM voice test buttons.
• The following ADPCM voices (sine wave of 1kHz/maximum
since wave of 1kHz) are output for five seconds.
NORMAL (
q
) Voice ID : 00020015
MAX (
w
) Voice ID : 00020014
However, if no map disk is not inserted, the ADPCM voices
are not output.
e
When terminated, the screen goes back to the NAVI Manual
check screen.
• In this screen, the beep is not sounded when q and w but-
tons are pressed.
TEST MODE