KNA-DV3100/DV3200
11
Screen Name : Navigation information screen
■
Screen appearance
Reset Position
Vehicle Signals
NAVIGATION INFO
GPS Information
2
4
1
3
■
Display details
q
VEHICLE/GYRO/SIGNALS screen is accessed.
w
GPS information screen is accessed.
e
Reset Position screen is accessed.
r
The screen returns to the On-screen diagnostics screen.
Screen Name : Vehicle signals screen
■
Functions outline
• In this screen, the vehicle signals input to the Navi ECU are
checked.
• The data is updated when the information changes.
■
Screen appearance
Voltage / Offset (mV)
Relative Bearing (
°
)
Gyro Sense
Gyro Info.
Reset
VEHICLE/GYRO SIGNALS
Vehicle Info.
ILL: ON
Speed (kph,mpk)
SPD Pulse Count
Distance Calibration (mm)
PKB: ON
REV: OFF
: 160, 100
: XXXXX
: 200
: 2500, 2495
: 359.0
: 1.000
11
10
4
5
6
7
8
3
2
9
1
■
Display details
q
When ILL signal is displayed :
• The condition of the PARK LAMP is displayed as : ON/OFF.
w
When PKB signal is displayed :
• The condition of the parking brake signal is displayed as :
ON/OFF
e
When REV signal is displayed :
• The condition of the REV signal is displayed as : ON/OFF.
r
Vehicle speed condition
• The vehicle speed is displayed in kph/mph.
The speed is displayed in maximum of 3 digits in LSB 1.
t
The count value of the SPD pulses is displayed. (The time
of access to the screen is set to 0. The count is displayed
in maximum of 5 digits in LSB 1 with the maximum of 65535
and when this is exceeded, the value is counted again from
0.)
y
Distance adjustment information
• The obtained value is displayed.
The value is displayed in maximum of 3 digits in LSB 1.
u
,
i
,
o
Gyro signal display
• Gyro output voltage value is displayed in mV.
The value is displayed in maximum of 4 digits in LSB with
1mV as the unit.
• Gyro output voltage value (left) and adjusted reference volt-
age (right) are displayed in mV.
The value is displayed in maximum of 4 digits in LSB with
1mV as the unit.
• The relative direction is displayed. (The time when the Navi
system is activated is set to 0.)
The value is displayed in maximum of 4 digits in LSB with
0.1 degree as the unit.
• The obtained value for the gyro sensitivity is displayed.
The value is displayed in maximum of 4 digits in LSB with
0.011 as the unit.
!0
Reset button for the gyro sensitivity obtained value
• This button is for resetting the gyro sensitivity obtained value.
!1
The screen returns to the Navigation Information screen.
TEST MODE