Note:
•
Before finally installing the unit, connect the
wiring temporarily, making sure it is all connect-
ed up properly, and the unit and the system work
properly.
•
Use only the parts included with the unit to
ensure proper installation. The use of unautho-
rized parts can cause malfunctions.
•
Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
tions of the vehicle.
•
Install the unit where it does not get in the dri-
ver’s way and cannot injure the passenger if there
is a sudden stop, like an emergency stop.
Installing the display unit
Installation using the blacket
(Fig. 1) (Fig. 2) (Fig. 3)
1. Display unit
2. Blacket (A)
3. Screw
4. Binding screw
5. Washer
6. Blacket (B)
7. Tapping screw
8. Double faced tape
9. Dashboard or console
10. Drill 2 to 2.5 mm diameter holes
Installation using Velcro tape
(Fig. 4) (Fig. 5)
•
Thoroughly wipe off the surface before affixing
the velcro tape.
11. Display unit
12. Velcro tape (Rough surface)
13. Velcro tape (Soft surface)
14. Dashboard or console
Installation using the double faced tape
(Fig. 6)
•
Thoroughly wipe off the surface before affixing
the double faced tape.
15. Display unit
16. Double faced tape
17. Dashboard or console
Installing the hide-away unit
Installation using Velcro tape
(Fig. 7)
•
Thoroughly wipe off the surface before affixing
the velcro tape.
18. Hide-away unit
19. Velcro tape
20. Car mat or chassis
Installation
<ENGLISH>
1
2
3
11
12
4
5
6
<KSNNF/03E00000>
AXM-P7050
Printed in Japan
<CRD3808-
B
> ES
7
9
10
8
Fig. 4
16
15
17
13
14
Fig. 2
Fig. 1
Fig. 3
Fig. 5
Fig. 6
INST
ALLA
TION MANUAL
INST
ALLA
TION MANUAL
This product conforms to new cord colors.
Los colores de los cables de este producto se
conforman con un nuevo código de colores.
20
18
19
Fig. 7
