![background image](http://html.mh-extra.com/html/kenwood/kna-dv3100/kna-dv3100_instruction-manual_188318022.webp)
Set Route
■
Intersection
Designate the intersection with 2 street names, and search for the place you want.
1
Enter the 1st street, and select
.
2
Select the street you want from the list .
: Displays up to five previous suggestions.
: Displays the previous suggestions.
: Displays the next suggestions.
: Displays up to five of the next suggestions.
3
Specify the 2nd street with the same operation.
4
Select (Destination)
or (Way
Point).
The intersection can’t be searched for in the cases shown below.
• The 2 streets selected don’t cross
• A freeway and highway
• A street for right or left turns only
• A one way street
• A street for U-turns
• Roads that cross on the inside lane
• A on/off ramp
• A frontage street
• There may be cases when the intersection can’t be searched for on other roads also.
3
(Destination Entry)
3
(Intersection)
Before Steps
22 English
English
KNA-DV3100(K)_ENG r7 03.7.7 5:34 PM Page 22