![background image](http://html.mh-extra.com/html/kenwood/kna-dv3100/kna-dv3100_instruction-manual_188318059.webp)
English 59
Confirm whether any problem is due to a minor operational error or a malfunction. Check the table
below before contacting your local dealer for any repair service.
The power does not come on.
The fuse might be blown.
The map does not scroll even when the vehicle is moving.
The screen shown might not be the Current
Position screen.
The vehicle marker does not appear.
The screen shown might not be the Current
Position screen.
The GPS marker is not displayed.
The GPS antenna or your vehicle might be in a
position where GPS signals cannot be received.
There is no voice guidance.
• Route guidance might be suspended.
• The guidance volume might be turned down low.
Small spots or bright flashes appear in the screen displayed.
This is probably due to the nature of the LCD
display.
The map disc cannot be ejected.
The disc might be incompatible or might have been
inserted incorrectly.
Troubleshooting
Check the fuse. Replace it if it is blown.
See page 7 of this manual to display the Current Position
screen.
See page 7 of this manual to display the Current Position
screen.
Try moving the GPS antenna or your vehicle to a position
where there are no obstacles around.
• The route guidance is off, see Route Options (page 35).
• See <Volume Adjustment> (page 36).
There is nothing wrong with the display and no need for
concern.
Restart the engine and see page 5 of this manual.
KNA-DV3100(K)_ENG r7 03.7.7 5:34 PM Page 59