Kenwood KNA-DV3100 Instruction Manual Download | Manualshive

Page: 56 / 60

background image

56 English

English

Voice Activate

If the KNA-VC300 Microphone & Talk switch is connected, it will be possible to control the
Navigation System through voice recognition. (The KNA-VC300 Microphone & Talk Switch is an
optional extra.)

• Care should be given to the following points to ensure that the voice

microphone’s level of voice recognition is as high as possible while performing
voice control.

• This microphone has directional characteristics, so you should speak towards

the microphone surface.

• Use your normal speaking voice.
• Ensure that the car windows are shut and turn down the volume of the audio

system.

• When connecting a KNA-VC300 Microphone & Talk switch (Optional extra) to

the navigation system and using it for the first time, after turning the car’s ACC
switch on, turn it off then back on again. If this is not done, the navigation
system will not recognize the KNA-VC300 and the KNA-VC300 cannot be used.

Select the language to be used for voice control.

1

Select .

2

Select (Language

Selection).

3

Select .

4

Select the language for voice control from the displayed
list.

: Displays up to five previous suggestions.
: Displays the previous suggestions.
: Displays the next suggestions.
: Displays up to five of the next suggestions.

Voice Recognition

Description

Microphone
surface

Talk switch

Microphone

KNA-DV3100(K)_ENG r7 03.7.7 5:34 PM Page 56

«
...
54
55
56
57
58
...
»

Summary of Contents for KNA-DV3100





























































Reviews:

No comments

Related manuals for KNA-DV3100

RoadMate 6000T - Automotive GPS Receiver

Brand: Magellan Pages: 119

RoadMate 6000T - Automotive GPS Receiver

Brand: Magellan Pages: 119

RoadMate 1400 - Automotive GPS Receiver

Brand: Magellan Pages: 81

RoadMate 1212 - Automotive GPS Receiver

Brand: Magellan Pages: 62

RoadMate 1212 - Automotive GPS Receiver

Brand: Magellan Pages: 60

Magellan Triton 1500

Brand: Magellan Pages: 33

Magellan eXplorist 300

Brand: Magellan Pages: 88

Magellan eXplorist 300

Brand: Magellan Pages: 89

Magellan eXplorist 300

Brand: Magellan Pages: 90

Maestro 4350 - Automotive GPS Receiver

Brand: Magellan Pages: 23

eXplorist - Hiking GPS Receiver

Brand: Magellan Pages: 70

Magellan eXplorist 300

Brand: Magellan Pages: 31

Spray Away 5266

Brand: Havahart Pages: 6

Brand: Dual Electronics Corporation Pages: 16

Brand: Ebinger Pages: 48

Brand: RainPoint Pages: 12

Stealthbox SB-D-DRNGO/10W0

Brand: JL Audio Pages: 3

Brand: Pioneer Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands