English
|
35
Audio Adjustments
“Sound Elevation”
Virtually raises the sound field using
the DSP.
“OFF”/ “Low”/ “Middle”/ “High”
“Volume offset”
Sets each source’s volume as a difference
from the basic volume.
“–8” — “0” (AUX: “–8”— “+8”
)
“Rear Mute”
*
2
Sets the Rear channel Mute.
“ON”/ “OFF”
“SubWoofer Mute”/
“Woofer Mute”*
1
Sets the Subwoofer Mute.
“ON”/ “OFF”
“Preset”*
1
Sets the audio preset.
- Audio Preset Memory (page 42).
- Audio Preset Recall (page 43).
“Bass Boost”*
1
Sets the Bass Boost level in 3 steps.
“OFF”/ “Level1”/ “Level2”/ “Level3”
“Loudness”*
1
Makes the sounds at high and low
frequencies louder.
“OFF”/ “Low”/ “High”
“Balance”/ “Fader”
*
2
Adjusts left/right and front/rear speaker
balance.
(Left) “L15” — “0” — “R15” (Right)
(Rear) “R15” — “0” — “F15” (Front)
*
1
( : Factory setting)
*
1
This setting can be made when “2 Zone” (Dual Zone
System) is set to ON.
*
2
This setting cannot be made when the speaker system is
connected in the 3-way mode.
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍
SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
Remarks
• DSP Set
When “DSP Set” is set to “Bypass”, the DSP function is
disabled , and the colored items can not be set.
Audio Control
You can adjust following Audio Setting items.
Display
Overview
“SubWoofer Level”/
“Woofer Level”*
1
You can set subwoofer level.
“–15” — “0” — “+15”
“Preset Equalizer”*
1
Sets the sound quality.
- Preset Equalizer curve Select (page
36).
“Manual Equalizer”*
1
Sets the sound quality.
- Manual Equalizer Control (page 36).
“Pro Setup”
“DSP Set”*
1
*
2
“Bypass”
: Disables the DSP function.
“Through”
: Enables the DSP function.
“Car Type”*
1
To get clear sound, set the sound
environment according to the location and
size of physically installed speakers with
reference to the followings:
- Car Type Selection (page 38).
- Speaker Setting (page 38).
- X’Over Setting (page 39).
- Listening Position Selection (page
40).
- Listening Position Fine Adjustments
(page 40).
- Channel Level Fine Adjustments (page
41).
“Speaker Setting”*
1
“X’Over”*
1
“DTA Setting”*
1
“Zone Control”
*
2
Sets the Dual Zone System.
- Dual Zone System (page 37).
“Sound
Enhancements”*
1
“Supreme”
Turns ON/OFF the Supreme function.
Can be set while Audio file source of USB/
SD/CD and iPod source.
“ON”/ “OFF”
“HIGWAY-SOUND”
Compensates the low volume or bass
sound being lost by road noises to make
vocal sound clearer.
“OFF”/ “Low”/ “Middle”/ “High”
“Space Enhancer”
Virtually enhances the sound space using
the DSP.
“OFF”/ “Small”/ “Medium”/ “Large”
“Sound Realizer”
Virtually makes the sound more realistic
using the DSP.
“OFF”/ “Level1”/ “Level2”/ “Level3”
SRC
4
VOL
¢
38
MENU VOL
Next page
3
B64-4900-00_00_en.indd 35
11/12/28 12:04
