l
Misuse of your appliance can result in injury.
l
Do not let the cord touch hot surfaces or hang down where a
child could grab it.
l
Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
l
Only use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
3
before plugging in
l
Make sure your electricity supply is the same as
the one shown on the underside of the appliance.
l
WARNING: THIS APPLIANCE MUST BE
EARTHED.
l
This appliance conforms to EC Regulation
1935/2004 on materials and articles intended to
come into contact with food.
before using for the first time
Wash the parts: see ‘care and cleaning’.
key
1
pusher
2
lid with hopper
3
scroll
4
filter basket
5
rotating wiper holder
6
juicing bowl
7
pulp spout
8
pulp container
9
power unit
bk
juice spout
bl
anti-drip stopper
bm
reset button
bn
On/Off/Reverse switch
bo
juice jug
bp
clip on sieve
bq
cleaning brush
br
sorbet attachment (if supplied)
using your juicer
1 Fit the pulp stopper
(A)
into the opening on the
underside of the juicing bowl
6
and push in
until secure
(B)
.
2 Fit the juicing bowl
6
to the power unit by
aligning the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
on the side of the bowl with
the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
on the power unit
(C)
. To lock the bowl
on turn it clockwise until the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
line up with the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
on the power unit
(D)
.
3 Place the filter basket
4
into the wiper holder
5
(E)
.
4 Lower the wiper holder assembly into the juicing
bowl and align the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / F
it the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
with the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / F
it the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
on the top of
the power unit
(F)
. Ensure that the filter basket
is locked into place.
5 Place the scroll
3
into the filter basket and
push down to secure
(G)
.
Note: the lid
cannot be fitted if the scroll is not fully
pushed down.
6 Fit the lid
2
onto the unit ensuring the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
lines up with the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
on top of the power unit
(H)
.
Then turn the lid clockwise until it clicks into
place and the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
lines up with the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
on top of
the power unit
(I)
. Place the food pusher
1
into the feed tube.
7 Place the pulp container
8
under the pulp
spout
7
and place the juice jug
bo
under the
juice spout
bk
. Ensure the anti-drip stopper
bl
is in the open position
(J)
before juicing.
l
There is a clip on sieve
bp
provided, this can be
used if a smooth juice is preferred and should
be emptied when full or after every 1kg of juicing.
l
Use the recommended usage chart as a guide for
juicing different fruits and vegetables.