Kenwood HM-636 Instruction Manual Download

Page: 42 / 48

Timer operation

When the timer setting is completed by pressing
the

set/demo

key, "

COMPLETE

" is displayed.

When the timer setting is completed by pressing
the

set/demo

key, "

COMPLETE

" is displayed.

Select the broadcast station (only when
TUNER is selected above).

(1) Select the preset station No.

(2) Set it.

Select the broadcast station (only when
TUNER is selected above).

(1) Select the preset station No.

(2) Set it.

Put the unit in standby mode.

When the unit enters the Standby mode, the

standby/

timer

indicator lights in green.

If there is a power failure or the power cord is un-

plugged after the timer reservation has been activated,

the

standby/timer

indicator blinks in green. In this

case, the clock setting should be restarted from the be-

ginning.

To check or modify the reservation contents, restart the timer reservation from the beginning.

5377/36-42/EN

03.4.24, 3:26 PM

Summary of Contents for HM-636

















































Search results

Summary of Contents for HM-636

Reviews:

Related manuals for HM-636

Brands by name

Popular brands

Kenwood HM-636, Instruction Manual

Search results

Summary of Contents for HM-636

Reviews:

Related manuals for HM-636

Brands by name

Popular brands