Kenwood HM-636 Instruction Manual Download

Page: 13 / 48

System connection

30˚

After plugging the power cord of this unit, press the

POWER ( ) key of the remote control unit to turn

the system ON. When the system is turned ON,

press the key of the function to be operated.

Operation

When pressing more than one remote control keys

successively, press the keys securely by leaving an in-

terval of 1 second or more between keys.

The provided batteries are intended for use in operation checking, and their service life may be short.

When the remote controllable distance becomes short, replace both of the batteries with new ones.

If direct sunlight or the light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote

sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

Operating range (approx.)

Remote sensor

Loading batteries

Remove the cover.

Insert batteries.

Close the cover.

Insert two R6 ("AA"-size) batteries following the polarity indications.

6 m

Controls and indicators

RANDOM key (CD)

Press for setting playback of tracks in a random order.

VOLUME keys

Press to adjust the volume.

Numeric keys

&™

Used to select a CD track number or recall a preset
station of the tuner.

PTY

TIME DISPLAY key (For Europe)

&¢

Used at the time of program type detection.
Press to switch the displayed time information on CD.

TIME DISPLAY key (For other countries)

Press to switch the displayed time information on CD.

SOUND key

Press to switch the sound effect to EX.BASS or
LOUD.

TONE key

Press to adjust the tone.

MUTE key

Press to mute the audio temporarily.

5377/06-13/EN

03.4.24, 3:10 PM

Summary of Contents for HM-636

















































Search results

Summary of Contents for HM-636

Reviews:

Related manuals for HM-636

Brands by name

Popular brands

Kenwood HM-636, Instruction Manual

Search results

Summary of Contents for HM-636

Reviews:

Related manuals for HM-636

Brands by name

Popular brands