Kenwood HM-636 Instruction Manual Download

Page: 15 / 48

Basic use method

Muting the sound temporarily

Press again to resume the original volume.

This is also canceled when the volume is changed.

Enhancement of bass

Each press switches the modes as follows.

"EX.BASS" lights.

The low frequencies are enhanced regardless
of the current volume level.

"LOUD" (Loudness) lights.

The low frequencies are enhanced according
to the current volume level. (Effective during
low-volume listening.)

Both indicators off.

Canceled.

Headphone with a stereo mini plug can be con-

nected.

The sound from all speakers are cut off.

Listening through headphone

Insert the headphone plug into the headphone jack.

The lowest and highest frequency bands can be
adjusted independently.

Tone adjustment

The levels of both "

BASS

" and "

TREBLE

" can be ad-

justed in 2 steps in the range between – 8 and +8.

Adjusting the tone while the "

LOUD

" or "

EX.BASS

indicator is lit turns it off and cancels the sound en-

hancement mode.

(To adjust the other frequency band, repeat steps

and

for it.)

Adjusting the tone while the "

LOUD

" or "

EX.BASS

indicator is lit turns it off and cancels the sound en-

hancement mode.

Select the frequency band.

Adjust.

Each press switches the operation.

"BASS" (low frequency) adjustment

"TREBLE" (high frequency) adjust-
ment

Normal mode

(Go to step

within 8 seconds.)

Remote control unit only

MUTE

SOUND

TONE

P.CALL

Remote control unit only

5377/14-17/EN

03.4.24, 3:12 PM

Summary of Contents for HM-636

















































Search results

Summary of Contents for HM-636

Reviews:

Related manuals for HM-636

Brands by name

Popular brands

Kenwood HM-636, Instruction Manual

Search results

Summary of Contents for HM-636

Reviews:

Related manuals for HM-636

Brands by name

Popular brands