Playback of TAPE
19
EN
To wind tape at high speed
÷
Press the
STOP
7
key to stop fast winding.
÷
The same operation is also available with the
4
and
¢
keys on the main unit.
Selection of TAPE equalizer (TAPE EQ.)
When playing a tape prerecorded with Noise Re-
duction system (such as the DOLBY NR) ON, be
sure to set the "TAPE EQ." ON for playback.
Each press switches the modes as follows.
1
"TAPE EQ." ON
(
TAPE equalizer is used)
2
"TAPE EQ." OFF
(
TAPE equalizer is not used
)
Lit when "TAPE EQ." is ON
÷
Select the "
TAPE EQ.
" ON mode according to the
recording condition of the tape.
Selection of reverse mode
To stop playback
The tape counter is set to "
0000
" when a cassette
tape is loaded. By writing down the counter read-
ing in case you want to interrupt recording (play-
back) in the middle of the tape, the memo will be
helpful as a reference for locating the same posi-
tion when continuing the recording (playback) the
next time. The tape counter figure decreases dur-
ing recording or playback of the back side (while
the
2
tape transport indicator is lit). To set the tape
counter to "
0000
", open the cassette holder once.
Then the counter will be reset.
A tip for use of the tape counter
1
Select "TAPE RVS".
2
Select.
3
Set it.
1
" " : (ONE-WAY)
Only one side is played back (recorded), and
then the tape stops.
2
" " : (REVERSE)
Both sides are played back (recorded), and
then the tape stops. When the tape transport
direction is "
2
", the tape stops after one side
has been played (recorded).)
3
"
" : (ENDLESS)
Both sides are played back endlessly. (The
tape stops after recording onto both sides.
When the tape transport direction is "
2
", the
tape stops after one side has been recorded.)
(The initial setting is "
"(REVERSE))
Main unit only
\
\
\
\
To fast wind in
direction
\
To fast wind in
direction
|
1
1
TUNING
TAPE EQ.
STOP
7
AUTO/MONO
5377/18-25/EN
03.4.24, 3:15 PM
19
