System connection
11
EN
9
rec key
¶
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
0
O.T.E. key
›
Press to start recording CD onto a tape with one-touch
operation.
Pressing this key during CD playback records only the
track being played onto tape. Pressing it while CD is in
stop state will record all the CD tracks onto tape.
!
4
and
¢
multi control keys
In the normal mode, these are used to
– skip CD tracks
&
– fast forward or rewind tape
(
– select a preset radio station
)
In the menu mode (selected by pressing the mode key),
press these buttons to select the desired menu item. To
set or enter setting of the menu item, press the set/demo
key.
•
Pressing these multi control keys switches the dis-
play contents.
"TAPE RVS"
(
"AUTO PRESET ?"
or
"AUTO MEMORY ?"
¡
(Only when the TUNER input is selected)
"INPUT
?"
fl
(Only when the AUX input is selected)
"TIMER
?"
·
"TIME ADJUST ?"
‡
"APS
?"
9
•
The function of these keys returns to the normal mode
when they have not been operated for 20 seconds.
7
Tuning Mode key
CD, TAPE :
&(
Press to stop a disc or tape operation.
TUNER :
™
Press to switch between the AUTO (auto tuning,
stereo reception) and MONO (manual tuning,
monaural reception) modes.
Standby mode:
‡
Press to display the clock.
@
)
CD open/close key
^
Press to open or close the CD tray.
#
Display panel
$
Basic operation keys
AUX key
fl
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
TUNER /band key
)
Press to select the TUNER input.
This key is also used to select the received broadcast
band.
CD
6
key
^
Press to select the CD input and start playback. During
CD playback, press to pause.
TAPE
2
3
key
*
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
%
standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
Red
: Ordinary standby.
Green : Timer standby.
Off
: The unit is On.
^
key
$
Press to set the unit to On or Standby.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory.
This is called standby mode. Under the condition, the system can be turned ON by the remote control
unit.
Controls and indicators
\
\
\
\
5377/06-13/EN
03.4.24, 3:10 PM
11
