Kenwood HM-382MD Instruction Manual Download

Page: 44 / 72

Application section

TAPE rec

STOP

Convenient Recording Methods

Program recording

(MD

TAPE)

Desired MD tracks can be programmed in the desired sequence and recorded onto a tape.

Be sure to put the MD recorder and cassette deck in stop mode.

Perform steps

and

of the procedure in ”Lis-

tening in the desired sequence (Program play-
back)”.

Program the desired sequence of MD tracks.

Put the MD recorder in pause mode before starting program playback.

Put the tape deck in record-pause mode.

When the

PGM/AUTO/MONO

key is pressed to cancel

the edited contents, the entire editing contents will be
erased.

Tracks programmed in excess of the tape recording time
will be cut off.

(Press twice.)

Make the preparations for recording.

Start recording.

To interrupt a recording

At the end of the recording

Cassette deck : Stop is executed after an unre-

corded portion of about 4 sec. has
been produced.

(Press twice.)

Tape recording starts at the same time as the MD
program playback.

(Recording and playback will be

stopped.)

: Insert a disc into the MD recorder.

TAPE : Perform steps 1 to 3 of the procedure

in ”Recording on TAPE”.

Note that this cassette deck cannot record onto
Metal tapes.

Note

When program playback starts, press the

key once

to return to the beginning of the track.

Summary of Contents for HM-382MD









































































Search results

Summary of Contents for HM-382MD

Reviews:

Related manuals for HM-382MD

Brands by name

Popular brands

Kenwood HM-382MD, Instruction Manual

Search results

Summary of Contents for HM-382MD

Reviews:

Related manuals for HM-382MD

Brands by name

Popular brands