Kenwood HM-382MD Instruction Manual Download

Page: 43 / 72

Application section

Start recording.

○

○○○○○○○○○○○○○○○○○○○○

MD O.T.E.

TAPE O.T.E.

menu

down

volume/

multi control

set/demo

Program recording

(CD

MD / CD

TAPE / TWIN REC)

Desired CD tracks can be programmed in the desired sequence and recorded onto an MD or tape.

Convenient Recording Methods

Be sure to put the MD recorder and cassette deck in stop mode.

Program the desired sequence of CD
tracks.

Make the preparations for recording.

MD / CD

TAPE

TWIN REC

Perform steps

and

of the procedure in

”Listening in the desired sequence (Program
playback)”.

When the

PGM/AUTO/MONO

key is pressed to cancel

the edited contents, the entire editing contents will be
erased.

Tracks programmed beyond the available MD or tape
recording time will be interrupted in the middle.

To interrupt a recording

( Recording and playback will be

stopped.)

Select ”REC MODE ?” then
”TWIN REC ?”.

Start recording.

At the end of the recording

MD recorder

: Stop.

Cassette deck : Stop is executed after an unre-

corded portion of about 4 sec. has
been produced.

: Insert a disc into the MD recorder.

TAPE : Perform steps 1 to 3 of the procedure
in ”Recording on TAPE”.

Insert disc in the CD player.

Note that this cassette deck cannot record onto
Metal tapes.

Note

Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.

STOP

Summary of Contents for HM-382MD









































































Search results

Summary of Contents for HM-382MD

Reviews:

Related manuals for HM-382MD

Brands by name

Popular brands

Kenwood HM-382MD, Instruction Manual

Search results

Summary of Contents for HM-382MD

Reviews:

Related manuals for HM-382MD

Brands by name

Popular brands