Kenwood HM-382MD, Instruction Manual

Page: 25 / 72

25
Basic section
AUTO TUNED
T
FM 87.50MHz
UNER P-- W E
AUTO
T
FM 1 87.50MHz
UNER P-- W E
ENTER
ENTER
AUTO
M
FM 87.50MHz
EMORY P-- W E
PGM
AUTO/MONO
Receiving broadcast station
One-by-one presetting
(manual preset)
( Proceed to step
2
while “MEMORY” is
lit.)
1
Press the ENTER key during reception.
2
Select one of the preset numbers from
1 to 40.
3
Press the ENTER key again.
(Repeat steps
1
,
2
,
3
to preset other
stations)
÷
If several stations are preset under the same number, the
previous memory is replaced with the latest memory
contents.
“MEMORY” lights (for approx. 20 sec.)
÷
When a key is held depressed, preset stations will be
skipped at an interval of about 0.5 second.
÷
Preset stations can be called using the number keys on
the remote control unit.
Reception band indication
Frequency display
Lights during stereo reception
The “TUNED” indicator lights
when a station is received.
Lights at the time of auto-
matic station selection.
÷
A maximum of 40 stations of the band presently being
received will be preset.
Tuning mode switching and reception mode
(Remote control unit only)
Each press alternates the mode.
1
“AUTO” lit
(Auto tuning, stereo reception)
2
“AUTO” not lit
(Manual tuning, monaural recep-
tion)
÷
Normally, use the AUTO (Auto tuning, stereo recep-
tion) mode.
Use the manual tuning mode when reception is
noisy due to weak reception. (In the manual mode,
stereo broadcasts are received in monaural.)
P.CALL