10
Preparations
DVF-N7080 (EN/E,X)
Y
C
B
C
R
COMPONENT VIDEO
R
L
AUDIO
VIDEO
S VIDEO
OPTICAL COAXIAL
DIGITAL OUT
(BIT STREAM/PCM)
ETHERNET
COMPONENT VIDEO OUTPUT
AV
OUTPUT
Y
C
B
C
R
COMPONENT VIDEO
R
L
AUDIO
VIDEO
S VIDEO
OPTICAL COAXIAL
DIGITAL OUT
(BIT STREAM/PCM)
ETHERNET
COMPONENT VIDEO OUTPUT
AV
OUTPUT
Note
Note
System Connections
Caution:
Do not plug in the power lead until all connections are completed.
Make connections as shown below.
When connecting the related system components, re-
fer also to the instruction manuals of the related com-
ponents.
Malfunction of microcomputer
Connecting to a TV with video input terminal
Component video cords
(Commercially available)
TV
Connecting to a TV with SCART input terminal
TV
SCART cable (Commercially available)
DTS disclaimer clause
When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is
connected to an amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to
the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the
copy protection system.
Audio cord
S-video cord (Commercially available)
* Connect only either the video (composite) cord or the S-video cord.
For connection with an audio cord, set the "Digital Audio" setting of the "Main" settings on the Setup menu screen
to "PCM (Analog on)".
*
Video cord
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the mi-
crocomputer referring to "
In case of difficulty
".
i
For connection with an audio cord, set the "Digital Audio" setting of the "Main" settings on the Setup menu screen
to "PCM (Analog on)".
*
*5498/01-14/EN
04.7.29, 6:21 PM
10
