11
Preparations
DVF-N7080 (EN/E,X)
Notes
Notes
Y
C
B
C
R
COMPONENT VIDEO
R
L
AUDIO
VIDEO
S VIDEO
OPTICAL COAXIAL
DIGITAL OUT
(BIT STREAM/PCM)
ETHERNET
COMPONENT VIDEO OUTPUT
AV
OUTPUT
INPUT
DIGITAL INPUT
AUDIO
VIDEO
R
L
OPTICAL
COAXIAL
Connecting to an Audio component
Audio cord
Optical cable (Commercially
available) or Coaxial Cord
TV
AV receiver or
AV amplifier
Video cord, S-video cord (Commercially available) or Component video cords (Commercially available)
(
0
)
1. In case an associated system component is connected, also read the instruction manual of the component.
2. If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces
a strong, distorted sound or no sound at all.
3. Insert the optical-fiber cable straight into the connector until it clicks.
4. Never bend or bundle the optical-fiber cable.
5. Do not place TV sets or other heavy objects onto this unit.
6. When a 96 kHz signal is played back, it is put out from the DIGITAL OUT terminal after conversion to 48 kHz.
System Connections
For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital con-
nection.
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic:
Connect the left and right
AUDIO OUT
jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo
system, using the audio cables.
For connection with an audio cord, set the "Digital Audio" setting of the "Main" settings on the Setup menu screen
to "PCM (Analog on)".
*
Amplifier equipped with 2-channel digital stereo (PCM) or a multi-channel decoder (Dolby Digital, MPEG 2, or DTS):
Connect one of the DVD Player's
DIGITAL OUT
jacks (
COAXIAL
or
OPTICAL
) to the corresponding in jack on your amplifier. Use a digital
(coaxial or optical) cable.
*5498/01-14/EN
04.7.29, 6:21 PM
11
