Kenwood DNX9980HD, Instruction Manual

Page: 65 / 200

English 65
Next page
3
Equalizer Control
You can set up the equalizer.
1 Display the Equalizer screen
Touch [ ]
>
[ ]
>
[Equalizer]. (page 64 )
2 Select EQ curves
[Natural], [Rock], [Pops], [Easy], [Top40], [Jazz],
[Game], [iPod], [User]
Selects an equalizer curve type.
You can select any of the following equalizer
curves.
⁄
• [iPod]
During iPod source only.
[EQ]
Displays the Graphic Equalizer setup screen.
(page 65 )
Graphic Equalizer Setup
You can Manually set the equalizer curve.
1 Display the Equalizer screen
Touch [ ]
>
[ ]
>
[Equalizer]. (page 64 )
2 Display the Graphic Equalizer screen
⁄
• When "iPod" is selected in <Equalizer Control>, the
[EQ] button is deactivated. "iPod" uses its equalizer
function.
3 Select the channel to be adjusted
[F]
Front speaker
[R]
Rear speaker
[C]
Center speaker
4 Set the Graphic Equalizer
1
1
Gain level can be adjusted by touching the
each frequency bar.
[
2
], [
3
]
Sets a frequency.
[
5
], [
∞
]
Sets a gain level.
[EQ INIT]
Returns to the previous level which the
gain level is adjusted.
[Flat]
Tone curve becomes flat.
[Bass EXT]
Bass Extend settings.
When turned on, the frequency lower than 62.5
Hz is set to the same gain level as 62.5Hz.
[SW Level]
Adjusts the subwoofer volume.
The setting is available when subwoofer is set
to any item other than "None". See
<Speaker
Setup> (page 69) .