Kenwood DNX9980HD, Instruction Manual

Page: 53 / 200

English 53
Next page
3
Hands Free Unit Control
Before Use
• For details on the Bluetooth cell-phone with the hands-
free function, see <About the Cell-Phone> (page 8) .
• You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Bluetooth Unit> (page 60) .
• If you have registered two or more cell-phones, you
need to select one of them. For more details, see
<Bluetooth Unit Connection> (page 62) .
• To use the Phone Book, it must be downloaded to this
unit in advance. For details, see <Downloading the
Phonebook> (page 53) .
• Sound output speaker can be set. See <Bluetooth
Hands-Free/Audio Output Setup> (page 62) .
Downloading the Phonebook
Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
1 By operating the cell-phone, send the
phonebook data to this unit
2 By operating the cell-phone, start the hands-
free connection
⁄
• For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically
for some reasons, follow the procedure above to
download manually.
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone
number along with up to 50* characters representing
a name.
(* 50: Number of alphabetical characters. Fewer
characters can be input depending on the type of
characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed:
- The phonebook data cannot be downloaded
normally.
- Characters in the Phonebook are garbled.
• To cancel downloading of the phonebook data,
operate the cell-phone.
Various functions can be used in the Hands Free control mode.
Receiving a Call
[ ]
Answering a Phone Call
[ ]
Rejecting an Incoming Call
⁄
• While monitoring the camera view, this screen is not
displayed even if a call comes in. To display this screen,
press the [TEL] button or return the shift knob of car to
the drive position.
During a Call
[ ]
Switches the voice output between
phone and speaker.
[DTMF]
Outputs dial tone. See <Controlling
Tone-based Services> (page 56) .
[ ]
Disconnecting a call
Adjusting the Voice Volume during a Call