Kenwood DNX9980HD, Instruction Manual

Page: 79 / 200

English 79
Next page
3
Panel Color Coordinate
Sets the button illumination color.
1 Display the Color screen
Touch [ ]
>
[ ]
>
[Display]
>
[Color].
(page 72 )
2 Display the Panel Color Coordinate screen
[Initialize]
Initialization resets the settings made
using the Panel Color SET process to the default
settings set at the factory.
[Panel Color Scan]
When set to "ON", the
illumination color of the buttons changes one
after another.
⁄
• When touching [SET] or [Initialize], make sure [Panel
Color Scan] is set to "OFF".
3 Select a color
1
1
Sets to the touched color.
[Adjust]
Sets and registers favorite color to the
preset buttons ([Preset1] – [Preset3]).
To register your original color
1 Start the RGB coordinate
2 Adjust each color value
1
1
Selects a preset number to register.
[Red Value]
Adjusts the Red value.
[Green Value]
Adjusts the Green value.
[Blue Value]
Adjusts the Blue value.
3 Select a Preset number to register
2 sec.
Adjusted color is registered to the selected Preset
button.
4 Complete the color coordination