12
DM-VH7 (EN)
DIGITAL IN
OPTICAL
SYSTEM
CONTROL
L
R
REC
IN
PLAY
OUT
1
2
DIGITAL IN
OPTICAL
1
DIGITAL
OUT
OPT ICAL
SYSTEM
CONTROL
MD
L
REC
OUT
PLAY IN
R
System connections
Make connection as shown below. When con-
necting the related system components, refer
also to the instruction manuals of the related
components.
Caution: Do not plug in the power lead until all
connections are completed.
When installing this unit, reserve a clearance of at
least 10cm from the rear wall.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet.
Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage
to the unit.
Malfunction of microprocessor
If operation is not possible or erroneous display
appears even though all connections have been
made properly, reset the microprocessor refer-
ring to
“In case of difficulty”
.
u
¶
To enable system operations including CD recording, it
is recommened to connect the CD receiver (RD-VH7)
to
“DIGITAL IN OPTICAL 1”
.
¢∞
¶
Commercial digital equipment (BS tuner, DAT, etc.)
can be connected to
“OPTICAL 2”
.
§º
TO WALL
AC OUTLET
System control cord
Optical fiber cable
DIGITAL IN jack
(OPTICAL)
Remove the protec-
tive cap before using
the DIGITAL IN jack.
Audio cord
RD-VH7 (optional)
Remove cap.
Notes
Notes
Audio cord
¶
Be careful not to lose the protective caps.