manualshive.com logo in svg

Kenwood DM-VH7, Instruction Manual

Share
Download
Kenwood DM-VH7 Instruction Manual Download Page 16

16

DM-VH7 (EN)

Operation of remote control unit

1

Remove the cover.

Insert batteries.

2

3

Close the cover.

Insert two R6 (“AA”-size) batteries
following the polarity indications.

The unit can be turned on by plugging the power
cord into a power outlet and pressing the “on/
standby (POWER (

))” key of the remote con-

trol unit. After the unit has been turned on, press the
desired operation key.

Operation

1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace all batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote

sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

Notes

Notes

Notes

Remote sensor

6 m

30°

30°

Reference operating range

When pressing more than one remote control keys
successively, press the keys securely by leaving an
interval of 1 second or more between pressing of keys.

Loading batteries

Summary of Contents for DM-VH7





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands