Kenwood CookEasy+ CCL50, Instructions Manual

Page: 7 / 58

3
Safety
O
Read these instructions carefully and retain for
future reference.
O
Remove all packaging and any labels.
O
If the cord is damaged it must, for safety reasons,
be replaced by KENWOOD or an authorised
KENWOOD repairer.
O
For correct operation ensure that the bowl base is
clean and dry before fitting to the power unit.
O
Always switch off and unplug before:
{
assembling or disassembling;
{
when not in use;
{
before cleaning.
O
Always remove the stir tool and whisk before
pouring content from the bowl to avoid burning
from splashing hot ingredients.
O
Be careful if hot liquid is poured into the appliance
as it can be ejected out of the appliance due to
sudden steaming.
O
The knife blade has been designed to be retained
on the drive shaft. The knife blade is sharp, handle
with care.
O
Keep utensils out of the bowl whilst connected
to the power supply unless the slow cook plug is
fitted.
O
Keep hands out of the bowl whilst connected to the
power supply.
O
When leaving the appliance unattended in the
cooking mode pay close attention to the following:
{
ensure the instructions are followed with regards
to temperatures and maximum quantities to
process;
{
make sure the unit and cord are positioned out of
reach of children and away from the edge of the
work surface;
{
check the progress on a regular basis to
ensure enough liquid is added and food is not
overcooking.